Categories

Knowledge

Working characteristics of the disperser
Dec 24, 2018

1 Strong centrifugal force breaks the material from the radial direction into the narrow and precise gap between the stator and the rotor. At the same time, it is subjected to centrifugal force, liquid layer friction and hydraulic impact. The material is initially dispersed.


2 The rotor rotating at high speed of the disperser produces a linear velocity of at least 15 m/s. The material is fully dispersed and broken under the action of strong hydraulic shearing, liquid layer friction, tearing collision, etc., and is simultaneously ejected through the stator slot at a high speed.


3 The material of the disperser is continuously ejected from the radial high speed, changing the flow direction under the resistance of the material itself and the wall of the container. At the same time, under the action of the upper and lower axial suction forces generated in the rotor area, the upper and lower two are formed. The stock has a strong turbulence. The material is recycled several times to complete the dispersion process.


  • QR CODE
  • facebook