System Specification – Dispenser
Fully automatic compact dispenser designed to dispense into 20L (5 US Gallon) pails to an accuracy of +1 gram (0.002 lbs). Dispensing controlled directly by a Delta PLC controller linked to the Host PC which will contain all Material & Formulation data. Full recirculation of product and automatic valve cleaning ensures the system is dispensing to its optimum at all times.
DN15 full recirculation 2 stage dispensing valves will be located above the main weigh scale. The combination of 15 & 1.8mm nozzle sizes ensure a fast, accurate and repeatable dispense. Manufactured totally of stainless steel the valves are accurate to within +1 gram (0.002 lbs).
60kg x 1 gram (60 x 0.002lb) electronic scale and power supply, stainless steel load plate 400 x 300mm and Indicator. The scale will be automatically moved away from the dispense head upon completion of blend, and manually remove the pail.
An electro/pneumatic control system will be supplied integral to the main dispense console. Recirculation of product is controlled automatically on a variable timed cycle. 110-240 VAC 10 amp supply is required to be connected by site electricians at time of installation.
Manual Control Backup
A Manual Control Backup system will be supplied as standard. In case of PC failure operators will be able to dispense ink through a valve selection switch and push button. This controls the full & fine flow stages of the valve & pump.
Windows® 7 PC with at least 2.0Ghz Intel processor, 2G Ram, 150GB Hard Drive, 32x CD Rom, 8mb Video Card, 15” Colour Monitor, Keyboard & Mouse.
Inkjet Report Printer.