Categories

Hot Products

News

Precautions When Using The Reactor
Dec 24, 2018

The reaction kettle is a kind of reaction equipment. It must be paid attention to during the operation. Otherwise, it will be damaged for many reasons, and the production will be forced to stop. There are many aspects to be aware of in the operation of the reactor.


First of all, it is necessary to strictly operate the reactor according to the rules and regulations.


Secondly, before operation, it should be carefully checked for any abnormalities. During normal operation, the upper cover and the terminals on the touch plate should not be opened to avoid electric shock; no pressure operation is allowed; during the pressure test with nitrogen, carefully observe the pressure. The change of the table, to achieve the pressure test pressure, immediately close the nitrogen valve switch; the heating rate should not be too fast, the pressure should also be slow, especially the stirring speed, only allow slow speed increase.


Finally, when the kettle body is heated to a higher temperature, do not contact the kettle body to avoid burns; the temperature should be lowered first after the experiment. Do not cool quickly to prevent damage caused by excessive temperature difference pressure. At the same time, you must unplug the power supply in time.


At the same time, the reactor should be carefully maintained after use, so that the autoclave can have a better service life.


  • QR CODE
  • facebook