Categories

Hot Products

News

  • The flow of the liquid filling machine is generally: the boxes with empty bottles are stacked on the tray, and the conveyor belt is sent to the unloading tray machine……
    Dec 24
    2018
  • ​The filling machine is mainly a small type of product in the packaging machine. It can be divided into liquid filling machine……
    Dec 24
    2018
  • Installation site: The reactor should be installed in a high-pressure operation room that meets the explosion-proof requirements.……
    Dec 24
    2018
  • The reaction kettle is a kind of reaction equipment. It must be paid attention to during the operation. Otherwise……
    Dec 24
    2018
  • The general understanding of the reactor is a stainless steel container with physical or chemical reaction. The structural design and parameter configuration of the container are carried out according to different process conditions.……
    Dec 24
    2018
  • The general understanding of the reactor is a container with physical or chemical reaction. Through the structural design and parameter configuration of the container, the heating, evaporation, cooling and low-speed mixing function required by the pr……
    Dec 24
    2018
  • ​The kneading machine is strongly sheared by a pair of cooperating and rotating weir blades, so that the semi-dry state or the rubbery viscous plastic material reacts quickly to obtain uniform mixing and agitation.……
    Dec 24
    2018
  • ​The kneading machine was developed by Heinz Rees, which became quite popular as it appeared in the processing industry.……
    Dec 24
    2018
  • Advances in grinding media separation systems As the demand for fineness of the product continues to increase, the size of the abrasive media used is getting smaller and smaller.……
    Dec 24
    2018
  • Long-term parking, check whether the dispersion disk is jammed by the media before starting the machine.……
    Dec 24
    2018
  • The mixer should be placed in a flat position, and the front and rear axles should be padded with square wood to keep the tires overhead, so as to avoid walking when starting.……
    Dec 24
    2018
  • QR CODE
  • facebook